Fork Mount Tie Downs w/ Aux Light Mount

A pair of fork mount tie downs with optional light mounts made of 1/8in (3.175mm) stainless steel. These will fit any motorcycle that use two 8mm bolts on the lower triple tree spaced 18-21mm apart. The tie down hole is large enough for insulated 3/8in tie down straps. The optional light mount hole is sized for 1/4in (6mm) light mounting bolts, but can be drilled out for larger bolts.

NOTES:

• Some tanks (especially aftermarket) have limited clearance at full steering lock, so compare your clearance at full lock to the clearance required listed for each part option below.
• Some motorcycles have front brake line guides that might interfere with a light mount on one side of the fork, for those machines, select one of the mixed options to run a single aux light

CLEARANCE: The required clearance specified below is from the mounting bolt center line to the furthest edge of the part. Note that you may require additional clearance for your light.

• • Tie Down Only = 0.75in (19mm)
  • Tie Down w/ 2in Light Mount = 1.0in (25mm)
  • Tie Down w/ 3in Light Mount = 1.75in (44mm)

Details:

• Weight (pair):
  • Tie Downs Only = 45gm
  • Tie Down w/ 2in Light Mount = 70gm
  • Tie Down w/ 3in Light Mount = 80gm
• Made in USA

Fits:
Any motorcycle with two 8mm lower triple tree bolts spaced 18-21mm apart